Embedding PaperCut on Konica Minolta Production Devices with Fiery Front-Ends

KB Home   |   Embedding PaperCut on Konica Minolta Production Devices with Fiery Front-Ends

Main.Konicaminoltafiery History

Hide minor edits - Show changes to output

May 21, 2019, at 09:52 PM by Aaron Pouliot - Prevented IC602 from linking to nonexistent page
Changed line 7 from:
The use of on-board applications with Fiery-enabled Konica Minolta devices has a few requirements, like the IC602 bundle, JT Workflow and Konica Minoltaís relevant connector, however we are unsure of the exact steps.
to:
The use of on-board applications with Fiery-enabled Konica Minolta devices has a few requirements, like the [=IC602=] bundle, JT Workflow and Konica Minoltaís relevant connector, however we are unsure of the exact steps.
January 21, 2019, at 08:12 PM by Aaron Pouliot - Grammar edited for clarity.
Changed lines 7-9 from:
When using on-board applications with a Fiery controller on a Konica Minolta device certain steps need to be taken.

This solution will require the [=IC602=]  bundle
, JT Workflow and the relevant connector from Konica Minolta. However, we are unsure of the exact steps.
to:
The use of on-board applications with Fiery-enabled Konica Minolta devices has a few requirements, like the IC602 bundle, JT Workflow and Konica Minoltaís relevant connector, however we are unsure of the exact steps.
January 21, 2019, at 07:57 PM by Aaron Pouliot - Formatting fix
Changed line 3 from:
 ''"Help! Iím a reseller of PaperCut and Iím trying to embed the PaperCut application on a production copier with a Fiery front-end. How do you do this?"''
to:
''"Help! Iím a reseller of PaperCut and Iím trying to embed the PaperCut application on a production copier with a Fiery front-end. How do you do this?"''
January 21, 2019, at 07:46 PM by Aaron Pouliot - Updated article from feedback in ZD#869735. Now links to Tracking Jobs on Fiery article.
Changed lines 1-6 from:
(:title Konica Minolta Fiery Setup:)

This KB article relates to '''PaperCut MF''', the edition of PaperCut that implements [[https://www.papercut.com/products/mf/|copier control]]

The following information is intended for resellers, integrators and hardware vendors. This information is designed for high
-end production devices.
to:
(:title Embedding PaperCut on Konica Minolta Production Devices with Fiery Front-Ends :)

 ''"Help! Iím a reseller of PaperCut and Iím trying to embed the PaperCut application on a production copier with a Fiery front
-end. How do you do this?"''

It's possible for PaperCut to [[https://www.papercut.com/kb/Main/TrackingJobsOnFiery|track jobs that are printed from Fiery devices]], however how do you use PaperCut for authentication and print release on a production machine that has a Fiery front-end?

Changed lines 9-11 from:
This solution will require the [=IC602=]  bundle, JT Workflow and the relevant connector from Konica Minolta.

On top of this further forms and analyst time may be required (from the vendor). For further information, please contact Konica Minolta
.
to:
This solution will require the [=IC602=]  bundle, JT Workflow and the relevant connector from Konica Minolta. However, we are unsure of the exact steps.

If this is your area of expertise and you would like to help us improve this documentation, please let us know by reaching out to us through our [[https://support
.papercut.com|Support Portal]].
January 18, 2019, at 03:50 PM by Aaron Pouliot - Set category to Konica Minolta Embedded
Changed line 14 from:
''Categories:'' [[Category.Category.PaperCut MF|+]]
to:
''Categories:'' [[Category.KonicaMinoltaEmbedded|+]]
Added lines 1-16:
(:title Konica Minolta Fiery Setup:)

This KB article relates to '''PaperCut MF''', the edition of PaperCut that implements [[https://www.papercut.com/products/mf/|copier control]]

The following information is intended for resellers, integrators and hardware vendors. This information is designed for high-end production devices.

When using on-board applications with a Fiery controller on a Konica Minolta device certain steps need to be taken.

This solution will require the [=IC602=]  bundle, JT Workflow and the relevant connector from Konica Minolta.

On top of this further forms and analyst time may be required (from the vendor). For further information, please contact Konica Minolta.

----
''Categories:'' [[Category.Category.PaperCut MF|+]]
----
[-Keywords: EFI-]

Comments

Share your findings and experience with other PaperCut users. Feel free to add comments and suggestions about this Knowledge Base article. Please don't use this for support requests.

Article last modified on May 21, 2019, at 09:52 PM
Printable View   |   Article History   |   Edit Article