Elatec TWN3 Card Readers for Toshiba MFP devices

KB Home   |   Elatec TWN3 Card Readers for Toshiba MFP devices

Main.ElatecFirmwareForToshibaMFP History

Hide minor edits - Show changes to output

Changed lines 1-2 from:
(:title Elatec TWN3 Card Readers for Toshiba MFP devices :)
to:
(:title Elatec TWN3 Card Readers for Toshiba MFP devices:)
Changed line 26 from:
''Categories:'' [[Category.General | +]]
to:
''Categories:'' [[Category.PaperCutMF|+]], [[Category.ToshibaEmbedded|+]]
Changed lines 3-4 from:
The Toshiba MFD can make use of the Elatec [=TWN3=] range of card-readers for authentication.   The Toshiba requires a customer firmware to be installed on the card-reader to be compatible with the Toshiba [=MFDs=].
to:
The Toshiba MFD can make use of the Elatec [=TWN3=] range of card-readers for authentication.  If you have an Elatec reader supplied by Toshiba, no changes should be required and your card reader should work out-of-the-box.  If you have sourced your card reader elsewhere, or if it does not work with your Toshiba device, you may need to flash the reader with custom firmware.

We recommend trying your card reader first, and only attempting the firmware flash if it does not already work
.
Added lines 23-25:
----
''Categories:'' [[Category.General | +]]
----
Changed lines 3-4 from:
The Toshiba MFD can make use of the Elatec TWN3 range of card-readers for authentication.  The Toshiba requires a customer firmware to be installed on the card-reader to be compatible with the Toshiba MFDs.
to:
The Toshiba MFD can make use of the Elatec [=TWN3=] range of card-readers for authentication.  The Toshiba requires a customer firmware to be installed on the card-reader to be compatible with the Toshiba [=MFDs=].
Changed line 14 from:
# Once connected run the "TWNConfig.exe" program from the above zip file, then press the "Connect" button.  After the device is connected, select the 4.12 firmware version on the "Firmware" tab and then press the "Program" button.
to:
# Once connected run the "[=TWNConfig=].exe" program from the above zip file, then press the "Connect" button.  After the device is connected, select the 4.12 firmware version on the "Firmware" tab and then press the "Program" button.
Added lines 1-22:
(:title Elatec TWN3 Card Readers for Toshiba MFP devices :)

The Toshiba MFD can make use of the Elatec TWN3 range of card-readers for authentication.  The Toshiba requires a customer firmware to be installed on the card-reader to be compatible with the Toshiba MFDs.

This firmware has been made available to PaperCut for our customers and partners to install.  This is available to download from the link below:

->[[https://www.papercut.com/anonftp/pub/mf/hardware/elatec/TWN3-firmware-for-toshiba.zip]]


To change the firmware:
# Unzip the above to a Windows PC.
# Connect the USB card reader to the PC.
# If you haven't connected a Elatec to your computer before, you'll need to install the driver which are included in the above Zip file.
# Once connected run the "TWNConfig.exe" program from the above zip file, then press the "Connect" button.  After the device is connected, select the 4.12 firmware version on the "Firmware" tab and then press the "Program" button.
# Press the "Restart" button and allow device to restart.
# Press the "Connect" button again and check that the device is in the "USB: Intelligent Virtual COM port" mode.  If you change this, press the "Write Config" button to save the configuration.
# Press "Restart" to restart the reader.

At this point the reader is ready to be used on Toshiba devices.

'''IMPORTANT:''' To use this MFP on other devices, you need to install the standard firmware to the device.

Comments

Share your findings and experience with other PaperCut users. Feel free to add comments and suggestions about this Knowledge Base article. Please don't use this for support requests.

Article last modified on July 26, 2011, at 04:31 AM
Printable View   |   Article History   |   Edit Article